Correx® Bollard Covers
Bollard covers are available in various shapes; sleeves, triangular or rectangular covers
Our printed bollard covers can be produced in any size or quantity. Designed for high-impact, these POS displays are sure to attract attention.
Prices from only £14
(see below for pricing)
Bollard covers are printed on weatherproof Correx ® plastic, cut to shape, and despatched to you flat for simple assembly without the use of fasteners, clips or glue. We regularly produce tailor made covers to fit either triangular, round or square bollards.
Correx® bollard covers are printed with UV printers directly onto corrugated (Correx® ) board and cut to shape. They are affordable and effective point-of-sale displays for outdoor use, providing both temporary and long-term advertising.
There are generally two types of Correx® bollard covers: triangular and square. We have standard sizes for these, but also provide a complete bespoke service, designing and printing your own custom bollard cover to requirements. In most cases, though, our standard sizes suffice.
These bollard sleeves are frequently used on car park and traffic management bollards, turning them into effective advertising opportunities. With the latest printing technology used at Screenprint & Display, we ensure your bollard prints are high resolution, vibrant and have a visual high-impact effect. Heads will turn with these prints!
To discuss your print requirements or pricing, please contact us.
Uses of Bollard Covers
The range of uses is extensive, but these Bollard Covers (or bollard sleeves) are perfect for;
• short term marketing campaigns
• store promotions
• car park advertising
• special offers
• instore events
Our 4-sided square Bollard Covers have 4 panels worth of space to get your message across and promote your brand. Naturally, the width of each panel is less than those of the triangular cover, but does open up more design possibilities than its triangular counterpart.
These square covers fit tighter on the bollards and are generally cheaper than 3-sided triangular covers based on the same size bollard.
Triangular bollard covers are sometimes preferred to square ones, offering a variation on the more traditional shape. These 3-sided covers offer more advertising space per panel (but obviously less panels!), and, therefore, can sometimes achieve a greater visual impact. The trade off for this is that they will never provide as tight a fit on the bollard as the 4-sided alternative.
Ordering Bollard Covers is Easy.....
We print Bollard Covers, bollard sleeves and other printed covers using a variety of printing techniques, including UV, digital and screen printing.
To order, simply fill out the order enquiry form in the right hand column on this page. We'll then send you an artwork template. All we require is the diameter of the bollard and the height.Once you have received the template simply add your artwork. We'll send you a digital proof to check prior to printing your custom Bollard Cover.
If you'd like a no obligation quote call the team now on 01347 823230 or visit our contact us page.
Can you have triangular and square Bollard Covers?
Yes, as they are custom made, you can have either (triangular) 3 or (square) 4 sided covers.
How do the covers fasten together?
There are a couple of ways to fasten them together, most frequently they are produced with interlocking tabs but we can also supply them with tabs that are supplied with a strong double sided tape or velcro.
What height are the Bollard Covers?
The standard height we produce is 1000mm / 1 metre. We can make any size up to 3000mm / 3 metres (these are used for lamppost covers).
How many colours can I have on the printed sleeve?
The sleeves can be printed in any number of colours or full colour. It is more cost effective for very large runs to be produced in a limited number of colours.
Can you have triangular and square Bollard Covers?
Yes we can supply the artwork template for your Correx bollard sleeve or cover, however we only send these out once an order is confirmed.
What is Correx?
Also sometimes called corvex, corex, fluted polypropylene, estate agent board plastic. The cheapest outdoor rigid plastic for temporary signage. It will last about a year outdoors. By far the most common thickness is 4mm (680gsm), but also available in 2,3,6,10mm. Correx is available in a selection of colours, but the vast majority is white. Yellow is the next most used. Correx® is a fully recyclable material.
How many covers do I need to order?
There is no minimum order quantity as we can digitally print small orders and for larger volumes screenprinting with pantone matched colours is an option.
How to measure for Bollard Covers? What size do I need?
There are 2 factors to consider when deciding on the size you require.
Firstly what is the height of the Bollard? If you could measure the height of the bollard with a tape measure, there are standard heights for covers, these are 800mm / 1000mm / 1200mm, however we can make custom sizes to suit your requirements.
Secondly you would need to know the diameter of the bollard. This can be calculated either by placing a ruler or measure on the top of the bollard, with the edge over the centre point to provide the diameter measurement. Alternatively use a tape measure around the circumference of the bollard and divide the measurement by 3.14 to calculate the diameter.
Once you know this information let our team know and we will provide you with an accurate quotation.
How to install Bollard covers?
The Correx® covers are easy to install. They will be delivered flat packed and we have put together a short video showing how to put them together, they are then simply placed over the bollards as required.
Where to buy Correx® Bollard Covers?
We print and supply throughout the UK. They are very easy to buy, simply contact our team and we can provide you with a quotation, artwork template and work with you to answer any queries or offer advice throughout the ordering process.
Other variants of this product
For pricing we just need to know...
We’re here to chat, either on the phone, 01347 823 230, or drop us an email and we’ll get straight back to you.
01347 823 230
"I just wanted to thank you and the team for getting our signs out to us so quickly and they look great" M.L. - MD, Security
"The samples and swatches arrived – Thank you! These are excellent and just what we are after," J.W. Event Director
“We give away free stickers with a large portion of orders made on the our website, so finding the cheapest price around without compromising on quality is really important to us. The team helped us place our sticker sheet order with ease and helped to guide us during the design and formatting process to make sure everything correct when it came to printing. Delivery was also quick considering the quantities we ordered! The quality of the stickers is fabulous and we’ve received some great feedback from our customers. Truly a 5* service.”
"We have been supplied quality Vinyl stickers by Screen Print and Display for at least 6 years. Our business started back in the early ‘00’s, and quite a number of other suppliers had been used until we tried Screen Print & Display. Since then we have not need to go anywhere else. Our stickers need to be tough, with a double lamination, and very adhesive, for submerge water use. We can highly recommend Screen Print & Display for quality products, customer service, and cost."
Screenprint's customer service is 10 out of 10. Nothing is ever too much trouble. They are efficient in responding to requests and their lead-times are swift. A very reliable company with a very personable team.
We have been using Screenprint & Display for a couple of years now. Their expertise and flexibility coupled with the team's great customer service make them our first port of call to deliver quality sticker products for very exacting clients!
Get in touch
Our team are available to speak to between 8.30am – 5pm (Monday – Friday), however we can be contacted by email 24/7.
Need a quick price or advice?
We’re here to help, and will get straight back to you
01347 823 230
Shires Bridge Mill, York Road, Easingwold, York, North Yorkshire YO61 3EQ
Correx® Bollard Sleeves | Custom Printed Correx®